Why the iPhone Software Update Server Could Not Be Contacted Happens?

Why the iPhone Software Update Server Could Not Be Contacted Happens?


When such an error message appears on the screen, it is pretty clear that the issue is related to the network connection. Either you are using an unstable Wi-Fi network or there is a glitch in the Wi-Fi connection which is stopping you from connecting to the server.


But it is also possible that Apple servers are having issues. When a new firmware is launched, Apple users from all over the world try to update their device, possibly the servers got overwhelmed with the response and unable to perform properly.


If there is an issue with the Apple servers, then you won't be able to fix it. You just have to wait for the technicians to fix the issue with the servers and then try again later.
Way 1: Check the Network Connection


So, it is possible that you are having network related issues and due to that fact you are having trouble to contact the server update software.


So, at the beginning you need to check your computer's router and follow the tips below.


Tip 1: So, at first you need to turn off your Wi-Fi router. Now, you have to wait for at least 10 minutes before turning your router on again. It is possible that after restarting the Wi-Fi router, the described issue could get fixed.


Tip 2: But if it does not, you have to find out if your computer, is actually getting connected to the Wi-Fi. Just, launch a website from your browser, in order to confirm your theory.


Tip 3: Unfortunately, if you find out that your computer is having issues connecting to the Wi-Fi or the connection itself is very weak. You have to connect to a different network.





So, you need to go through these 3 tips very carefully and need to figure out if the network issues are responsible for this connectivity problem.
Way 2: Update iPhone Software via OTA


If the network wasn't the cause of this issue, then the problem may caused by iTunes. You can update the iOS through OTA. OTA means, over the air. OTA is one of the official ways to update iOS.


Step 1: Navigate to the "Settings" of your iOS device.


Step 2:Now, you have to go to "General" and tap on "Software Update". Any update available will be visible, here.


Step 3: If there is any, just tap on "Download and Install" in order to update your iOS device.





You have to make sure that the internet connection is stable, at the download and install will take a longer period of time and without a proper Wi-Fi network, it will be impossible.
Way 3: Download the Firmware for the Update


If still, you are getting software update server could not be contacted error on your iPad or on your iPhone, you need to download the firmware.


Just by downloading the firmware you will be able to update the iOS and it may not have the issue we talked. But there are the more than 1 ways to update the firmware. You can do it manually, which is the official but older procedure. Or you can download it easily with the help of professional tool.If you lost data after you updated to a new iPhone, you can always use Gihosoft iPhone Data Recovery to get the data back from the old iPhone or backup.You may also like: iphonerecovery.com

10.2-inch iPad Could Launch Alongside iPhone 11 in Q3 2019

DigiTimes believes that Apple will release the 10.2-inch iPad towards the end of the third quarter. This possibly means that Apple could unveil this tablet alongside the iPhone 11 lineup at its September event.

Apple usually reserves its September event for iPhone and Apple Watch. However, since the iPhone lineup is going to see a minor refresh this year, it is possible that Apple could launch the 10.2-inch iPad alongside it.

As to sizes, 10.x-inch tablets will continue to dominate the market. Apple is set to release 10.2-inch new iPads in late third quarter

The 10.2-inch iPad is expected to replace the aging 9.7-inch iPad which was last refreshed in 2018. Since the screen size would be bumped to 10.2-inches, Apple will reduce the bezels as it has done with its iPad Pro lineup.

The 9.7-inch iPad starts from $329 and Apple will likely try to retain the same price tag. This means that internal upgrades are going to be modest in nature and we could be looking at an A11 or A12 Bionic chip powering the tablet.

Apple tends to launch new iPads in October or in March. But with 10.2-inch iPad getting a minor update, it is possible that Apple could end up skipping the October event entirely and simply talk about it in brief at its September iPhone event.Read Next:ipad home button not working

Read Next:movie4k

Are you looking forward to Apple launching a 10.2-inch iPad? The company has already unveiled a 10.5-inch iPad Air earlier this year.

[Via DigiTimes]